Black Death Brushed Motor Power Comm Drops
Add drop or two on the commutator every run will increase power.
Great to use when breaking in your new brushes.
Lubes commutator and keeps brushes from burning.
Comes in a 1/2oz (15ml) Needle Tip Bottle
Brushed Motor BREAK-IN Tip:
For Breaking in a Brushed Motor, Best method is run the motor on low voltage less than 3 volts.
Start with a drop or two of oil on each bushing or bearing and a drop or two of comm drops on each brush. About half way through the break in add another drop or two of comm drops.
For a sealed can motor like a Tamiya Mabuchi Motor I would run it for at least 1 hour.
For a Rebuildable Brushed Motor with stock or upgraded brushes run the motor for about 30 minutes
If you have a motor mount to hold the motor add a small fan to motor shaft to blow air through the motor to keep it cool.
When finished clean motor with electric motor spray and re-oil the bearings or bushings
Adding one drop of comm drops before a run will add a little performance, but brushes will wear quicker.